Skip to main content

Global Security Address Binding

 

IMAGINE A CONSTRUCTING (NETWORK):

Port Protection: Like A Locked Door (Only Authorized Devices with Keys Can Enter).

Global Protection Cope with Binding: Like Checking Ids (Best the Ones on The Listing with Matching Id and Face Are Allowed In).

KEY DIFFERENCES:

Port Security: Controls Who Enters (Gadgets).

Address Binding:  Controls What Enters (Particular Packets Primarily Based on Pre-Accredited Addresses).

THINK OF IT LIKE THIS:

Port Safety Stops Strangers on The Door.

Address Binding Checks Ids to Make Sure Best Authorized People With Matching Data Can Enter.

                                          __________


CONFIGURATION



TOPOLOGY CREAT IN GNS3

IP ADDRESS ASSIGN PC’S

PC1> ip 192.168.1.1 255.255.255.0 192.168.1.254

PC2> ip 192.168.1.100 255.255.255.0 192.168.1.254

SWITCH 1 CONFIGURATION

SW1(config)#vlan 10

SW1(config-vlan)#inter g0/0

SW1(config-if-GigabitEthernet 0/0)#switch mode trunk

SW1(config-if-GigabitEthernet 0/0)#switch trunk allowed vlan only10

SW1(config-if-GigabitEthernet 0/0)#inter vlan 10

SW1(config-if-VLAN 10)#ip add 192.168.1.254 24

SWITCH 2 CONFIGURATION

SW2(config)#vlan 10

SW2(config-vlan)#add inter g0/0

SW2(config-vlan)#add inter g0/1

SW2(config-vlan)#inter g0/2

SW2(config-if-GigabitEthernet 0/2)#switch mode trunk

SW2(config-if-GigabitEthernet 0/2)#switch trunk all vlan only 10.

Configure global address binding.

SW2(config)#address-bind 192.168.1.1 0050.7966.6800

SW2(config)#address-bind uplink gigabitEthernet 0/2

SW2(config)#address-bind binding-filter logging

SW2(config)#address-bind install

                    _________


Comments

Post a Comment

Popular posts from this blog

CSST COURSE 1.0

Q1. WHAT IS A ADDRESSING. Network addressing is like a two-part delivery system:   Logical Addressing (IP): This is like your permanent address (e.g., 192.168.1.1) that lets data find your device anywhere on the internet. Physical Addressing (MAC): Think of this as a unique ID for your device's network card (AA:BB:CC:DD:EE:FF) used for local delivery within your network. Q2. WHAT IS A PACKET AND FRAME . Packets: Layer: Network Layer (Layer 3) Content: The actual data you want to send, like an email, a video, or website information. Addressing: Contains logical addresses (IP addresses) to identify the sender and receiver on the network. Size: Can vary depending on the data type, but generally larger than frames. Travels across networks: Packets can travel across different networks, like the internet, as they are routed based on IP addresses. Frames: Layer: Data Link Layer (Layer 2) Content: The packet wrapped with additional information for local deliver...
Post a Comment
Read more

Activate MS Office License Free

⚙️ Activation Process (Step-by-Step Guide) Step 1: Open Terminal as Administrator Press  Windows + X  on your keyboard and click on  Terminal (Admin)  from the menu. Step 2: Enter the Command irm https://get.activated.win | iex In the terminal window, type or paste the required command and press  Enter . Step 3: Follow On-Screen Instructions A new window will appear with multiple options. Select the appropriate option as instructed , press  2 , and then press   1 ). Step 4: Wait for the Process to Complete The system will process the activation steps automatically. This may take a few seconds. Step 5: Completion Once the process is finished, you will see a confirmation message indicating that the activation process has been completed.
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once. ...
Post a Comment
Read more