Skip to main content

Layer Two Tunneling Protocol(L2TP)

 L2TP, WHICH STANDS FOR LAYER 2 TUNNELING PROTOCOL, IS A NETWORKING PROTOCOL USED TO CREATE SECURE VIRTUAL PRIVATE NETWORKS (VPNS).

PURPOSE:

L2TP ITSELF DOESN'T PROVIDE ENCRYPTION OR AUTHENTICATION.

ITS PRIMARY FUNCTION IS TO ESTABLISH A "TUNNEL" BETWEEN YOUR DEVICE AND A VPN SERVER, ENCAPSULATING YOUR DATA PACKETS WITHIN ANOTHER LAYER OF INFORMATION.

THIS TUNNEL ACTS AS A SECURE CHANNEL FOR TRANSMITTING YOUR DATA OVER THE PUBLIC INTERNET.


L2TP CAN BE USED FOR A VARIETY OF PURPOSES, INCLUDING

REMOTE ACCESS

L2TP CAN BE USED TO PROVIDE REMOTE ACCESS TO A CORPORATE NETWORK. THIS ALLOWS EMPLOYEES TO CONNECT TO THE CORPORATE NETWORK FROM HOME OR FROM A REMOTE LOCATION.

SITE-TO-SITE VPN

L2TP CAN BE USED TO CREATE A SITE-TO-SITE VPN BETWEEN TWO NETWORKS. THIS ALLOWS TWO NETWORKS TO SECURELY COMMUNICATE WITH EACH OTHER, EVEN IF THEY ARE NOT DIRECTLY CONNECTED.

CONTENT DELIVERY

L2TP CAN BE USED TO DELIVER CONTENT TO REMOTE USERS. THIS CAN BE USED TO DELIVER STREAMING MEDIA, SUCH AS VIDEO OR AUDIO, OR TO DELIVER SOFTWARE UPDATES TO REMOTE DEVICES.

L2TP IS A VERSATILE PROTOCOL THAT CAN BE USED FOR A VARIETY OF PURPOSES. IT IS A RELIABLE AND SECURE PROTOCOL THAT CAN BE USED TO CREATE SECURE VPN CONNECTIONS.

HERE ARE SOME OF THE BENEFITS OF USING L2TP

IT IS A RELIABLE AND SECURE PROTOCOL.

IT CAN BE USED TO CREATE A VARIETY OF VPN CONNECTIONS.

IT IS COMPATIBLE WITH A WIDE RANGE OF DEVICES AND PLATFORMS.

HERE ARE SOME OF THE LIMITATIONS OF USING L2TP

IT IS NOT AS WIDELY SUPPORTED AS SOME OTHER VPN PROTOCOLS.

IT CAN BE MORE COMPLEX TO CONFIGURE THAN SOME OTHER VPN PROTOCOLS.

IT DOES NOT PROVIDE AS MUCH SECURITY AS SOME OTHER VPN PROTOCOLS.

__________________

IF YOU WANT PDF IN URDU TRANSLATION OF THIS BLOG THEN CLICK ON "ABDUL MANAN JAVED"

Pop Out 

 BELOW AFTER CLICKING, A WINDOW WILL OPEN BELOW AND WHAT IS SHOWN IN THE IMAGE IS TO CLICK ON THE POP-OUT AND YOU WILL HAVE A PDF OPEN AND YOU CAN ALSO DOWNLOAD IT.


Comments

Post a Comment

Popular posts from this blog

BRIDGE MODE AND NAT MODE AP

  BOTH BRIDGE MODE AND NAT MODE ARE WAYS TO CONFIGURE AN ACCESS POINT (AP) TO EXTEND A NETWORK, BUT THEY DIFFER IN HOW THEY HANDLE IP ADDRESSES AND NETWORK TRAFFIC: BRIDGE MODE: CONCEPT: ACTS AS A TRANSPARENT BRIDGE, SIMPLY RELAYING DATA BETWEEN WIRED AND WIRELESS DEVICES. IP ADDRESS: DEVICES OBTAIN THEIR IP ADDRESSES FROM AN UPSTREAM DHCP SERVER, TYPICALLY THE MAIN ROUTER ON THE NETWORK. NETWORK TRAFFIC: ALL DEVICES, BOTH WIRED AND WIRELESS, ARE SEEN AS PART OF THE SAME NETWORK AND CAN DIRECTLY COMMUNICATE WITH EACH OTHER. BENEFITS: SEAMLESS ROAMING: DEVICES CAN EFFORTLESSLY SWITCH BETWEEN APS WITHOUT LOSING THEIR IP ADDRESS OR CONNECTION. SIMPLIFIED NETWORK MANAGEMENT: ALL DEVICES ARE ON THE SAME SUBNET, MAKING CONFIGURATION AND TROUBLESHOOTING EASIER. INCREASED COMPATIBILITY: WORKS WITH DEVICES THAT DON'T SUPPORT NAT TRAVERSAL (E.G., SOME VPN CLIENTS). DRAWBACKS: LESS SECURITY : ALL DEVICES ARE DIRECTLY EXPOSED TO EACH OTHER, POTENTIALLY INCREAS
Post a Comment
Read more

What Is A Ip Excluded Address

  AN IP EXCLUDED ADDRESS IS AN IP ADDRESS THAT HAS BEEN CONFIGURED ON A DHCP SERVER TO BE EXCLUDED FROM THE POOL OF ADDRESSES THAT CAN BE ASSIGNED TO DHCP CLIENTS.  THIS IS TYPICALLY DONE TO RESERVE IP ADDRESSES FOR SPECIFIC DEVICES, SUCH AS PRINTERS, SERVERS, OR OTHER NETWORK DEVICES THAT NEED TO HAVE A STATIC IP ADDRESS. IP EXCLUDED ADDRESSES CAN ALSO BE USED TO PREVENT DHCP CLIENTS FROM RECEIVING IP ADDRESSES THAT ARE ALREADY IN USE BY OTHER DEVICES ON THE NETWORK.  THIS CAN HELP TO AVOID IP ADDRESS CONFLICTS AND IMPROVE NETWORK PERFORMANCE. TO CONFIGURE AN IP EXCLUDED ADDRESS ON A DHCP SERVER, YOU WILL NEED TO KNOW THE IP ADDRESS THAT YOU WANT TO EXCLUDE. ONCE YOU HAVE THE IP ADDRESS, YOU CAN USE THE APPROPRIATE DHCP SERVER CONFIGURATION COMMANDS TO ADD THE IP ADDRESS TO THE EXCLUSION LIST. SOME EXAMPLES OF WHEN YOU MIGHT WANT TO USE IP EXCLUDED ADDRESSES: TO RESERVE AN IP ADDRESS FOR A SPECIFIC DEVICE, SUCH AS A PRINTER OR SERVER. TO PREVENT DHCP CLIENTS FROM RECEIVING I
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once.
Post a Comment
Read more