Skip to main content

Transmission Mode

 

WHAT IS TRANSMISSION

TRANSMISSION MODE MEANS TRANSFERRING DATA BETWEEN TWO DEVICES CONNECTED OVER A NETWORK IT IS ALSO KNOWN AS MODE OF COMMUNICATION.

TYPES OF  TRANSMISSION MODE

THERE ARE THREE TYPES OF TRANSMISSION MODE.

1.  SIMPLEX

2.  HALF DUPLEX 

3.  FULL DUPLEX 


SIMPLEX MODE

IN THIS MODE OF COMMUNICATION  DATA CAN BE SENT ONLY ONE DIRECTION MEANS UNI- DIRECTIONAL.

EX: LoudSpeaker , Keyboard, Monitor. Etc.........

You See It Communication Only One Directional It.
                                                              _________________

HALF-DUPLEX MODE

IN THIS MODE OF COMMUNICATION A SENDER CAN SEND THE DATA AS WELL AS RECEIVES THE DATA BUT NOT AT THE SAME TIME.

EXAMPLE :  WALKIE-TALKIE

__________________


FULL-DUPLEX MODE

IN THIS MODE OF COMMUNICATION THE SENDER CAN SEND AS WELL AS RECEIVE THE DATA ON THE OTHER HAND THE RECEIVER CAN RECEIVE AS WELL AS SEND THE DATA AT THE SAME TIME.

EXAMPLE :  TELEPHONE NETWORK


_____________________


SIMPLEX VS HALF-DULEX VS FULL DUPLEX DIAGRAM


__________________

IF YOU WANT PDF IN URDU TRANSLATION OF THIS BLOG THEN CLICK ON "ABDUL MANAN JAVED"

Pop Out 

 BELOW AFTER CLICKING, A WINDOW WILL OPEN BELOW AND WHAT IS SHOWN IN THE IMAGE IS TO CLICK ON THE POP-OUT AND YOU WILL HAVE A PDF OPEN AND YOU CAN ALSO DOWNLOAD IT.





Comments

Post a Comment

Popular posts from this blog

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once. ...
Post a Comment
Read more

Types Of Attack in Network

Common Network Attacks Explained. 1. Overwhelming a Network (DoS/DDoS): Imagine a restaurant that's flooded with too many customers. In a DoS/DDoS attack: A website is overwhelmed with too much traffic. 2. Eavesdropping on Conversations (MitM): Imagine someone listening in on your phone call. In a MitM attack: An attacker listens to your online conversations. 3. Tricking You (Phishing): Imagine receiving a fake email from your bank. In phishing: Attackers try to trick you into giving them your personal information. 4. Finding a Weakness in a Website (SQL Injection): Imagine finding a hole in a fence. In an SQL injection attack: An attacker finds a weakness in a website to steal or change data. 5. Planting a Hidden Camera (XSS): Imagine someone hiding a camera in a party. In an XSS attack: An attacker hides harmful code on a website to spy on you. 6. Guessing Your Password (Password Attck): Imagine trying to guess a friend's password. In a pas...
Post a Comment
Read more

FLAOT ROUTE + NAT

  TOPOLOGY GO TO ISP-1 ROUTER AND ENTER THIS COMMANDS IN CONFIGURATION TERMINAL MODE . inter f0/0 ip address 202.56.215.1 255.255.255.0 no shutdown exit ip dhcp excluded-address 202.56.215.1 202.56.215.20  ip dhcp pool isp1 network 202.56.215.0 255.255.255.0 default-router 202.56.215.1 exit inter loopback 0  ip address 8.8.8.8 255.0.0.0 no shutdown exit write GO TO ISP- 2 ROUTER AND ENTER THIS COMMANDS IN CONFIGURATION TERMINAL MODE . inter f1/1 ip address 200.200.200.1 255.255.255.0 no shutdown exit ip dhcp excluded-address 200.200.200.1 200.200.200.100  ip dhcp pool isp2 network 200.200.200.0 255.255.255.0 default-router 200.200.200.1 exit inter loopback 0  ip address 8.8.8.8 255.0.0.0 no shutdown exit write GO TO R1 ROUTER AND ENTER THIS COMMANDS IN CONFIGURATION TERMINAL MODE . inter fa0/0 ip address 192.168.100.1 255.255.255.0 no shut exit inter f1/0 ip address dhcp no shutdown inter f1/1 ip address dhcp no shut ip dhcp pool manan network 192.168.100.0 255....
Post a Comment
Read more