Skip to main content

DHCP CONFIGURATION

 CISCO ROUTER CLI INTERFACE HIS 3 MODE

1.USER MODE
                            Router>
2. ENABLE MODE
                                    Router#
3. CONFIGURATION TERMINAL MODE
                                                                           Router(config)#

_________________________

WHEN FIRST TIME ROUTER HIS OPEN THE FIST MODE HIS APPEARS

   Router>   AND WHEN TO ENABLE MODE TO ENTER    Router> enable

SEE  TO ENABLE MODE    Router#

AND WHEN TO CONFIGURATION MODE TO ENTER  router# config t

AND SEE THE CONFIGURATION MDE  router(config)#

_______________________

THE PURPOSE OF ENABLE MODE IS ALL THE CONFIGURATION YOU PERFORMS A ROUTER TO SEE IT AND ANY IP PING IN ENABLE MODE
AND CHECK COMMUNICATION.

THE PURPOSE OF CONFIGURATION TERMINAL MODE ALL THE PROTOCOLS AND CONFIGURATION POERFORMED HIS MODE.

1. DHCP CONFIGURATION

DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) IS A CLIENT/SERVER PROTOCOL THAT AUTOMATICALLY PROVIDES AN INTERNET PROTOCOL (IP) HOST WITH ITS IP ADDRESS.

AND OTHER RELATED CONFIGURATION INFORMATION SUCH AS THE SUBNET MASK AND DEFAULT GATEWAY AND DNS SERVER IP.

DHCP IS CONFIGURED ON THE ROUTER AND MULTI-LAYER SWITCHES AND IS ALSO A SERVICE OF THE SERVER.

___________________________________________________________________________________

CONFIGURATION

FIRST STEP

DHCP HAS TO BE CONFIGURED ON THE ROUTER.

SECOND STEP

GO TO COMPUTERS AND CLICK THE DHCP OPTION.

___________________________________________________________________________________

FIRST STEP


CONFIGURATION ROUTER COMMANDS

Router(config)#  inter gig0/0
Router(config)#  ip address 192.168.1.0 255.255.255.0
Router(config)#  no sh
Router(config)#  ip dhcp pool CORVITE

Router(config)#  network 192.168.1.0 255.255.255.0

Router(config)#  default-router 192.168.1.1

Router(config)#  dns-server 192.168.1.50



SECOND STEP


GO TO COMPUTERS AND CLICKE THE DHCP OPTION.

___________________________________________________________________________________


Comments

Post a Comment

Popular posts from this blog

BRIDGE MODE AND NAT MODE AP

  BOTH BRIDGE MODE AND NAT MODE ARE WAYS TO CONFIGURE AN ACCESS POINT (AP) TO EXTEND A NETWORK, BUT THEY DIFFER IN HOW THEY HANDLE IP ADDRESSES AND NETWORK TRAFFIC: BRIDGE MODE: CONCEPT: ACTS AS A TRANSPARENT BRIDGE, SIMPLY RELAYING DATA BETWEEN WIRED AND WIRELESS DEVICES. IP ADDRESS: DEVICES OBTAIN THEIR IP ADDRESSES FROM AN UPSTREAM DHCP SERVER, TYPICALLY THE MAIN ROUTER ON THE NETWORK. NETWORK TRAFFIC: ALL DEVICES, BOTH WIRED AND WIRELESS, ARE SEEN AS PART OF THE SAME NETWORK AND CAN DIRECTLY COMMUNICATE WITH EACH OTHER. BENEFITS: SEAMLESS ROAMING: DEVICES CAN EFFORTLESSLY SWITCH BETWEEN APS WITHOUT LOSING THEIR IP ADDRESS OR CONNECTION. SIMPLIFIED NETWORK MANAGEMENT: ALL DEVICES ARE ON THE SAME SUBNET, MAKING CONFIGURATION AND TROUBLESHOOTING EASIER. INCREASED COMPATIBILITY: WORKS WITH DEVICES THAT DON'T SUPPORT NAT TRAVERSAL (E.G., SOME VPN CLIENTS). DRAWBACKS: LESS SECURITY : ALL DEVICES ARE DIRECTLY EXPOSED TO EACH OTHER, POTENTIALLY INCREAS
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once.
Post a Comment
Read more

VSC (Virtual Cluster Switching)

  VIRTUAL CLUSTER SWITCHING (VCS): THIS IS A PROPRIETARY NETWORK FABRIC TECHNOLOGY DEVELOPED BY BROCADE, LATER ACQUIRED BY EXTREME NETWORKS. IT ALLOWS MULTIPLE PHYSICAL SWITCHES TO BE COMBINED AND MANAGED AS A SINGLE LOGICAL UNIT, OFFERING SEVERAL BENEFITS: SIMPLIFIED MANAGEMENT: MANAGE THE ENTIRE VCS AS ONE ENTITY, REDUCING CONFIGURATION OVERHEAD AND TROUBLESHOOTING COMPLEXITY. INCREASED PORT DENSITY: COMBINE PORTS FROM MULTIPLE SWITCHES TO CREATE A LARGER POOL OF AVAILABLE CONNECTIONS. IMPROVED PERFORMANCE:   ENHANCE LINK UTILIZATION AND LOAD BALANCING ACROSS MULTIPLE PHYSICAL LINKS, REDUCING BOTTLENECKS. ENHANCED REDUNDANCY:   PROVIDES FAILOVER PROTECTION IN CASE OF A SWITCH FAILURE. TRAFFIC WILL BE AUTOMATICALLY REROUTED TO OTHER SWITCHES WITHIN THE VCS. SIMPLIFIED NETWORK TOPOLOGY: ELIMINATES THE NEED FOR COMPLEX LINK AGGREGATION OR SPANNING TREE PROTOCOL (STP) CONFIGURATIONS. _________ VCS, OR VIRTUAL CLUSTER SWITCHING, CAN OPERATE IN DIFFERENT MODES DEPENDI
Post a Comment
Read more