Skip to main content

Describe Physical Infrastrucure Connection Of Wlan Component. 2.7

 

THE PHYSICAL INFRASTRUCTURE CONNECTIONS OF WLAN COMPONENTS REFER TO THE PHYSICAL CONNECTIONS BETWEEN VARIOUS COMPONENTS OF A WIRELESS LOCAL AREA NETWORK (WLAN), INCLUDING ACCESS POINTS (APS), WIRELESS LAN CONTROLLERS (WLCS), ACCESS AND TRUNK PORTS, AND LINK AGGREGATION (LAG).

ACCESS POINTS (APS)

ARE THE MAIN COMPONENTS THAT PROVIDE WIRELESS ACCESS TO THE NETWORK. THEY CAN BE CONNECTED TO THE NETWORK THROUGH EITHER A WIRED ETHERNET CONNECTION OR A WIRELESS CONNECTION TO A NEARBY AP. WHEN CONNECTED TO THE NETWORK WIRED, AN AP IS TYPICALLY CONNECTED TO A SWITCH PORT IN ACCESS MODE. THIS MEANS THAT THE AP IS ONLY CONNECTED TO A SINGLE VLAN AND CAN ONLY COMMUNICATE WITH DEVICES THAT ARE ALSO ON THAT VLAN.

WIRELESS LAN CONTROLLERS (WLCS)

 ARE CENTRAL COMPONENTS IN A WLAN THAT PROVIDE MANAGEMENT AND CONTROL FOR CONNECTED APS. THEY ARE TYPICALLY CONNECTED TO THE NETWORK THROUGH A WIRED ETHERNET CONNECTION. A WLC CAN BE CONNECTED TO A SWITCH PORT IN EITHER ACCESS MODE OR TRUNK MODE. IF THE WLC IS CONNECTED TO A SWITCH PORT IN ACCESS MODE, THEN IT CAN ONLY COMMUNICATE WITH APS THAT ARE ALSO ON THE SAME VLAN. IF THE WLC IS CONNECTED TO A SWITCH PORT IN TRUNK MODE, THEN IT CAN COMMUNICATE WITH APS THAT ARE ON ANY VLAN.

ACCESS PORTS

ACCESS PORT ARE SWITCH PORTS THAT PROVIDE A DIRECT CONNECTION BETWEEN A SWITCH AND AN END DEVICE, SUCH AS A LAPTOP OR DESKTOP COMPUTER. ACCESS PORTS ARE TYPICALLY CONFIGURED AS UNTAGGED MEMBERS OF A SINGLE VLAN. THIS MEANS THAT ALL TRAFFIC THAT PASSES THROUGH AN ACCESS PORT IS ASSIGNED TO THE VLAN THAT THE PORT IS A MEMBER OF.

TRUNK PORTS

TRUNK PORTS  ARE SWITCH PORTS THAT PROVIDE A CONNECTION BETWEEN SWITCHES AND SUPPORT THE TAGGING OF MULTIPLE VLANS. TRUNK PORTS ARE USED TO CONNECT APS TO SWITCHES AND WLCS. WHEN AN AP IS CONNECTED TO A TRUNK PORT, IT CAN COMMUNICATE WITH DEVICES THAT ARE ON ANY VLAN THAT IS TAGGED ON THE TRUNK PORT.

LINK AGGREGATION (LAG)

LINK AGGREGATION  IS A TECHNIQUE THAT CAN BE USED TO COMBINE MULTIPLE PHYSICAL PORTS INTO A SINGLE LOGICAL PORT. THIS CAN BE USED TO INCREASE THE BANDWIDTH BETWEEN TWO DEVICES, OR TO PROVIDE REDUNDANCY IN CASE ONE OF THE PHYSICAL PORTS FAILS. LAG IS OFTEN USED TO CONNECT APS TO SWITCHES AND WLCS.

___________

IF YOU WANT PDF IN URDU TRANSLATION OF THIS BLOG THEN CLICK ON "ABDUL MANAN JAVED"



 BELOW AFTER CLICKING, A WINDOW WILL OPEN BELOW AND WHAT IS SHOWN IN THE IMAGE IS TO CLICK ON THE POP-OUT AND YOU WILL HAVE A PDF OPEN AND YOU CAN ALSO DOWNLOAD IT.

Comments

Post a Comment

Popular posts from this blog

CSST COURSE 1.0

Q1. WHAT IS A ADDRESSING. Network addressing is like a two-part delivery system:   Logical Addressing (IP): This is like your permanent address (e.g., 192.168.1.1) that lets data find your device anywhere on the internet. Physical Addressing (MAC): Think of this as a unique ID for your device's network card (AA:BB:CC:DD:EE:FF) used for local delivery within your network. Q2. WHAT IS A PACKET AND FRAME . Packets: Layer: Network Layer (Layer 3) Content: The actual data you want to send, like an email, a video, or website information. Addressing: Contains logical addresses (IP addresses) to identify the sender and receiver on the network. Size: Can vary depending on the data type, but generally larger than frames. Travels across networks: Packets can travel across different networks, like the internet, as they are routed based on IP addresses. Frames: Layer: Data Link Layer (Layer 2) Content: The packet wrapped with additional information for local deliver...
Post a Comment
Read more

Activate MS Office License Free

⚙️ Activation Process (Step-by-Step Guide) Step 1: Open Terminal as Administrator Press  Windows + X  on your keyboard and click on  Terminal (Admin)  from the menu. Step 2: Enter the Command irm https://get.activated.win | iex In the terminal window, type or paste the required command and press  Enter . Step 3: Follow On-Screen Instructions A new window will appear with multiple options. Select the appropriate option as instructed , press  2 , and then press   1 ). Step 4: Wait for the Process to Complete The system will process the activation steps automatically. This may take a few seconds. Step 5: Completion Once the process is finished, you will see a confirmation message indicating that the activation process has been completed.
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once. ...
Post a Comment
Read more