Skip to main content

Access Point


WHAT IS ACCESS POINT

AN ACCESS POINT (AP) IS A DEVICE THAT CREATES A WIRELESS LOCAL AREA NETWORK (WLAN), OR WI-FI NETWORK. APS ARE TYPICALLY CONNECTED TO A WIRED NETWORK, SUCH AS AN ETHERNET NETWORK, AND THEY ALLOW WIRELESS DEVICES TO CONNECT TO THE WIRED NETWORK.
 
APS WORK BY BROADCASTING A WIRELESS SIGNAL THAT WIRELESS DEVICES CAN DETECT AND CONNECT TO. WHEN A WIRELESS DEVICE CONNECTS TO AN AP, IT IS ASSIGNED AN IP ADDRESS AND CAN THEN ACCESS THE WIRED NETWORK AND THE INTERNET.
 
APS ARE USED IN A VARIETY OF SETTINGS, INCLUDING HOMES, BUSINESSES, AND PUBLIC PLACES. THEY ARE AN ESSENTIAL PART OF ANY WIRELESS NETWORK, AND THEY ALLOW WIRELESS DEVICES TO CONNECT TO THE INTERNET AND OTHER RESOURCES ON THE NETWORK.

HERE ARE SOME OF THE BENEFITS OF USING AN ACCESS POINT:
 
EXTENDS WIRELESS COVERAGE: 

APS CAN BE USED TO EXTEND THE WIRELESS COVERAGE OF A NETWORK. THIS IS USEFUL IN LARGE BUILDINGS OR AREAS WHERE THE WIRELESS SIGNAL FROM A SINGLE ROUTER MAY NOT BE STRONG ENOUGH.

INCREASES THE NUMBER OF DEVICES THAT CAN CONNECT TO THE NETWORK:

APS CAN BE USED TO INCREASE THE NUMBER OF DEVICES THAT CAN CONNECT TO A NETWORK. THIS IS USEFUL IN BUSINESSES OR OTHER ORGANIZATIONS WHERE THERE ARE A LOT OF WIRELESS DEVICES, SUCH AS LAPTOPS, SMARTPHONES, AND TABLETS.

IMPROVES SECURITY: 

APS CAN BE USED TO IMPROVE THE SECURITY OF A NETWORK. THIS IS BECAUSE APS CAN BE CONFIGURED TO USE ENCRYPTION, WHICH HELPS TO PROTECT DATA FROM BEING INTERCEPTED.

IF YOU ARE LOOKING FOR A WAY TO EXTEND THE WIRELESS COVERAGE OF YOUR NETWORK, INCREASE THE NUMBER OF DEVICES THAT CAN CONNECT TO YOUR NETWORK, OR IMPROVE THE SECURITY OF YOUR NETWORK, AN ACCESS POINT IS A GOOD OPTION TO CONSIDER.
 
HERE ARE SOME OF THE FEATURES OF AN ACCESS POINT:
 
RADIOS: 

APS TYPICALLY HAVE TWO OR MORE RADIOS, ONE FOR THE WIRED NETWORK AND ONE OR MORE FOR THE WIRELESS NETWORK.

ANTENNAS: 

APS TYPICALLY HAVE ONE OR MORE ANTENNAS, WHICH ARE USED TO TRANSMIT AND RECEIVE THE WIRELESS SIGNAL.

SOFTWARE: 

APS TYPICALLY HAVE SOFTWARE THAT IS USED TO CONFIGURE THE AP AND MANAGE THE WIRELESS NETWORK. 

________________

Comments

Post a Comment

Popular posts from this blog

About Me Information

HELLO FRIENDS, I HOPE YOU ALL ARE DOING WELL. I AM MAKING THIS BLOG FOR THE INFORMATION OF NETWORKING ABOUT. IN THIS BLOG WE WILL READ CCNA (200-301) AND ITS RELATED AND NETWORK RELATED INFORMATION. MY NAME IS ABDUL MANAN JAVED MANJ MY AGE IS 21 YEAR    I AM STUDED ABOUT NETWORK  TECHNOLOGY EMAIL ID : mananrajpoot449@gmail.com CONTACT NO : +923486777628 ADDRESS : ISLAMABAD,G7,KHADA MARKET My Website   My Facebook Account My Facebook Page My Linkedin Profile _____________________________ CONTENT ABOUT  HIS BLOGG 1.  Computer Network 2.   What Is Internet 3.   Network Architecture 4.  Osi Refrence Model 5.  Operating System 6.  Internet Protocol (Ip) 7.  Internet Protocol Types 8.   Port Number 9.  Mac-Address 10.    WHAT IS HUB 11.   WHAT IS SWITCH 12.   WHAT IS ROUTER 13.   WHAT IS NETWORK 14.   NETWORK CABLES 15.   ROUTING 16.  Data Transmission 17...
Post a Comment
Read more

CSST COURSE 1.0

Q1. WHAT IS A ADDRESSING. Network addressing is like a two-part delivery system:   Logical Addressing (IP): This is like your permanent address (e.g., 192.168.1.1) that lets data find your device anywhere on the internet. Physical Addressing (MAC): Think of this as a unique ID for your device's network card (AA:BB:CC:DD:EE:FF) used for local delivery within your network. Q2. WHAT IS A PACKET AND FRAME . Packets: Layer: Network Layer (Layer 3) Content: The actual data you want to send, like an email, a video, or website information. Addressing: Contains logical addresses (IP addresses) to identify the sender and receiver on the network. Size: Can vary depending on the data type, but generally larger than frames. Travels across networks: Packets can travel across different networks, like the internet, as they are routed based on IP addresses. Frames: Layer: Data Link Layer (Layer 2) Content: The packet wrapped with additional information for local deliver...
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once. ...
Post a Comment
Read more