Skip to main content

Routing

 

WHAT IS ROUTING


1. ROUTING IS A PROCESS OF SELECTING PATH ALONG WHICH THE DATA CAN BE TRANSFERRED FROM SOURCE TO THE DESTINATION. 

2. ROUTING IS PERFORMED BY A SPECIAL DEVICE KNOWN AS A ROUTER.

3.  A ROUTER WORKS AT THE NETWORK LAYER IN THE OSI MODEL AND INTERNET LAYER IN TCP/IP MODEL.

A ROUTER IS A NETWORKING DEVICE THAT FORWARDS THE PACKET BASED ON THE INFORMATION AVAILABLE IN THE PACKET HEADER AND FORWARDING TABLE.

4. THE ROUTING ALGORITHMS ARE USED FOR ROUTING, THE PACKETS. THE ROUTING ALGORITHM IS NOTHING BUT A SOFTWARE RESPONSIBLE FOR DECIDING THE OPTIMAL PATH THROUGH WHICH PACKET CAN BE TRANSMITTED. 

5. THE ROUTING PROTOCOLS USE THE METRIC TO DETERMINE THE BEST PATH FOR THE PACKET DELIVERY. 

THE ROUTING ALGORITHM INITIALIZES AND MAINTAINS THE ROUTING TABLE FOR THE PROCESS OF PATH DETERMINATION.

TYPES OF ROUTING

1. STATIC ROUTING

2. DYNAMIC ROUTING

3. DEFAULT ROUTING


1. STATIC ROUTING

1. STATIC ROUTING IS ALSO KNOWN AS NON- ADAPTIVE ROUTING. 

2. IT IS A TECHNIQUE IN WHICH THE ADMINISTRATOR MANUALLY ADDS THE ROUTES IN A ROUTING TABLE. 

A ROUTER CAN SEND THE PACKETS FOR THE DESTINATION ALONG THE ROUTE DEFINED BY THE ADMINISTRATOR.

ADDVANTAGES OF STATIC ROUTING

1. ADVANTAGES OF STATIC ROUTING FOLLOWING ARE THE ADVANTAGES OF STATIC ROUTING: 

2.  NO OVERHEAD: IT HAS HO OVERHEAD ON THE CPU USAGE OF THE ROUTER. THEREFORE, THE CHEAPER ROUTER CAN BE USED TO OBTAIN STATIC ROUTING.

3. BANDWIDTH: IT HAS NOT BANDWIDTH USAGE BETWEEN THE ROUTERS. 

4.  SECURITY: IT PROVIDES SECURITY AS THE SYSTEM ADMINISTRATOR IS ALLOWED ONLY TO HAVE CONTROL OVER THE ROUTING TO A PARTICULAR NETWORK.

 DISADVANTAGES OF STATIC ROUTING

1. FOR A LARGE NETWORK, IT BECOMES A VERY DIFFICULT TASK TO ADD EACH ROUTE MANUALLY TO THE ROUTING TABLE. 

2. THE SYSTEM ADMINISTRATOR SHOULD HAVE A GOOD KNOWLEDGE OF A TOPOLOGY AS HE HAS TO ADD EACH ROUTE MANUALLY.
_________ 

DYNAMIC ROUTING

1. DYNAMIC ROUTING IT IS ALSO KNOWN AS ADAPTIVE ROUTING. 

2. IT IS A TECHNIQUE IN WHICH A ROUTER ADDS A NEW ROUTE IN THE ROUTING TABLE FOR EACH PACKET IN RESPONSE TO THE CHANGES IN THE CONDITION OR TOPOLOGY OF THE NETWORK. 

3.  DYNAMIC PROTOCOLS ARE USED TO DISCOVER THE NEW ROUTES TO REACH THE DESTINATION. IN DYNAMIC ROUTING, RIP AND OSPF ARE THE PROTOCOLS USED TO DISCOVER THE NEW ROUTES. 

4. IF ANY ROUTE GOES DOWN, THEN THE AUTOMATIC ADJUSTMENT WILL BE MADE TO REACH THE DESTINATION.

ADVANTAGES OF DYNAMIC ROUTING

1. IT IS EASIER TO CONFIGURE. 

2. IT IS MORE EFFECTIVE IN SELECTING THE BEST ROUTE IN RESPONSE TO THE CHANGES IN THE CONDITION OR TOPOLOGY.

 DISADVANTAGES OF DYNAMIC ROUTING

1. IT IS MORE EXPENSIVE IN TERMS OF CPU AND BANDWIDTH USAGE. 

2. IT IS LESS SECURE AS COMPARED TO DEFAULT AND STATIC ROUTING.

__________

DEFAULT ROUTING

1. DEFAULT ROUTING IS A TECHNIQUE IN WHICH A ROUTER IS CONFIGURED TO SEND ALL THE PACKETS TO THE SAME HOP DEVICE, AND IT DOESN'T MATTER WHETHER IT BELONGS TO A PARTICULAR NETWORK OR NOT. 

2. A PACKET IS TRANSMITTED TO THE DEVICE FOR WHICH IT IS CONFIGURED IN DEFAULT ROUTING.  

3. DEFAULT ROUTING IS USED WHEN NETWORKS DEAL WITH THE SINGLE EXIT POINT. 4. IT IS ALSO USEFUL WHEN THE BULK OF TRANSMISSION NETWORKS HAVE TO TRANSMIT THE DATA TO THE SAME HOP DEVICE.  

5. WHEN A SPECIFIC ROUTE IS MENTIONED IN THE ROUTING TABLE, THE ROUTER WILL CHOOSE THE SPECIFIC ROUTE RATHER THAN THE DEFAULT ROUTE. 

6. THE DEFAULT ROUTE IS CHOSEN ONLY WHEN A SPECIFIC ROUTE IS NOT MENTIONED IN THE ROUTING TABLE.

____________

AD VALUES ROUTING PROTOCOL

 

METRICS MEANS NO.. OF HOPE


__________________

ALL INFORMATION PROTOCOLS






 

Comments

Post a Comment

Popular posts from this blog

BOOTABLE USB

  WHO TO MAKE A BOOTABLE USB IN WINDOW 10 WHO TO DOWNLOAD WINDOW 10 ISO IMAGE. FOLLOW THIS VEDIO STEPS. 1. FIRST YOU NEED TO DOWNLOAD A SOFTWARE CALLED RUFUS. THIS SOFTWARE IS A MAXIMUM OF THREE TO FOUR MB. THIS SOFTWARE IS FREE OF COST AND FREE OPEN RESOURCE TOOL BY USING IT YOU WILL MAKE YOUR USB BOOTABLE. THE DOWNLOAD LINK OF THIS SOFTWARE IS GIVEN BELOW. Download Rufus 2. AFTER DOWNLOADING THE SOFTWARE YOU HAVE TO INSTALL THE ISO IMAGE OF WINDOWS 10 ON YOUR PC.  THE PROCESS OF DOWNLOADING ISO IMAGE OF WINDOWS 10 IS EXPLAINED IN THIS VIDEO. PLEASE WATCH THIS VIDEO CAREFULLY. 3. AFTER DOWNLOADING THIS WINDOW 10 ISO IMAGE FILE YOU HAVE TO ATTACH THE USB TO YOUR PC AND THEN OPEN THE SOFTWARE BY DOUBLE CLICKING AND ALLOW SOME PERMISSIONS. 3. WHEN SOFTWARE IS OPEN YOUR USB NAME IS SHOW IN DEVICE BOX. 4.  WHEN YOUR DEVICE IS SHOWN, THEN YOU HAVE TO CLICK ON THE SECOND OPTION I.E. BELOW THE BOOT SELECTION WHICH IS ON THE SIDE OF OPTION SELECT. AFTER CLICKING, YOU HAVE TO...
Post a Comment
Read more

DOS AND DDOS ATTACK

A Dos (Denial-Of-Service) Attack and A DDOS (Distributed Denial-Of-Service) Attack Are Both Attempts to Make a Computer System or Network Resource Unavailable to Legitimate Users. However, They Differ in How They Achieve This: Dos Attack: Imagine A Single Person Throwing Rocks at A Castle Gate. A This Person Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attacker Keeps Throwing Rocks, Trying to Overwhelm the Gate's Defenses and Gain Entry. Dos Attacks Are Typically Launched from A Single System. They Can Be Effective Against Small Systems or Networks, But Larger Systems Can Often Withstand Them. DDos Attack: Imagine An Army Throwing Rocks at A Castle Gate. This Army Represents the Attacker, And the Rocks Represent the Malicious Traffic. The Castle Gate Represents the Target System or Network Resource. The Attackers Coordinate Their Attack, Throwing Rocks from Multiple Directions at Once. ...
Post a Comment
Read more

Activate MS Office License Free

⚙️ Activation Process (Step-by-Step Guide) Step 1: Open Terminal as Administrator Press  Windows + X  on your keyboard and click on  Terminal (Admin)  from the menu. Step 2: Enter the Command irm https://get.activated.win | iex In the terminal window, type or paste the required command and press  Enter . Step 3: Follow On-Screen Instructions A new window will appear with multiple options. Select the appropriate option as instructed , press  2 , and then press   1 ). Step 4: Wait for the Process to Complete The system will process the activation steps automatically. This may take a few seconds. Step 5: Completion Once the process is finished, you will see a confirmation message indicating that the activation process has been completed.
Post a Comment
Read more